Datec News Room

Case Study: Designing a Dry Heated Well Using mica-TF® Technology

Steam tables have been the de facto standard used by foodservice operators to keep pre-cooked food at a safe hot temperature. However, steam tables are plagued by many challenges including: High operating costs driven by the need for water to be heated continuously. They pose a safety hazard for employees who risk being injured by […]

Improving Performance with Thick Film Heaters

Thick film technology has a track record of meeting the rigorous needs of micro-electric circuits for decades. The technology has been used worldwide for fabricating printed circuit boards, sensors, heaters, and in photonics. Over the past several years, the science of thick film and its manufacturing systems have co-evolved to consistently produce robust electronic devices. […]

Collaborative Engineering, Shorter Cycle Times and New Technology Drive Datec’s Growth Story in 2019

2019 was a watershed year for Datec Coating Corporation in terms of its commercial and engineering achievements as the company solidified its credentials as a North American leader for patented thick film heating technology.

Season’s Greetings from Datec Coating

The holiday season is a wonderful time to reflect on the past year and those who have helped us make it a success. Thank you for your continuing support and may your holiday season be filled with joy! Our Holiday Hours December 25th to January 1st: Closed From all of us here at Datec, we […]

Modernizing the Food Industry with Thick Film and Glass Heating

The foodservice industry has been evolving for many years, but only in the past 70 years have speed, convenience, and consistency been so necessary to restaurant and food preparation operations, arguably propelled by the ‘McDonaldization’ of the industry. Not only are foodservice retailers needing to “keep up” in these categories, but they need to do […]

Highlights from the 2019 NAFEM Show

Datec recently attended the NAFEM Food Service and Equipment Supply Show in Orlando, where we had the opportunity to discuss our latest heating innovations for food equipment. NAFEM is North America’s largest food equipment manufacturer event, and an industry leader in providing comprehensive coverage of the trends, technologies, and issues facing the global foodservice experience. […]

Featured Solution: Portable Cancer Treatment Device for Underdeveloped Countries

At Datec, we design, test, and manufacture application-specific, high-performance heating solutions for our clients. Recently, we developed an aluminum-based heater for a lightweight, battery-powered device used to treat cancer in underdeveloped parts of the world. The client required a medical device that could be used to thermally destroy cancerous cells. Traditionally, such lesions have been […]

Season’s Greetings from Datec Coating

We would like to wish you a very Happy Holiday and all the best for 2019! We hope you are able to spend the season in the company of your closest family and friends, making wonderful memories, and enjoying everything that this time of year has to offer. Our Holiday Hours • December 24th – […]

Will Parts Manufacturing and Research into New Technology Save the Canadian Automotive Industry?

General Motors (GM) announced last week that the company will stop making cars in Oshawa, ON after next year and will cease production on many of their gas-powered sedans. Although the latter announcement received less media attention in Canada due largely to the closure of the Oshawa plant, this news reinforces GM’s shift from gas-powered […]

Providing Essential Products

Jun 04, 2020 | Dominic Talalla, P.Eng, MBA

As the health of global citizens and economies continues to face great uncertainty, we at Datec feel fortunate to be a vital service producing essential goods for our customers With stringent safety measures in place including staggered scheduling, working from home where possible, physical distancing, enhanced cleaning and wearing masks and gloves, we have been […]

Read More

Helping Our First Responders

May 01, 2020 | Anthony Crocco

I am Anthony Crocco, Senior Production Supervisor at Datec Coating Corporation in Mississauga. We use gloves and N95 masks in our production facility. Knowing these items are in short supply for essential workers, especially in hospitals, I suggested that Datec donate some to the Brampton Civic Hospital where my family recently received incredible kindness and […]

Read More

Case Study: Designing a Dry Heated Well Using mica-TF® Technology

Apr 15, 2020 | Abin Raju

Steam tables have been the de facto standard used by foodservice operators to keep pre-cooked food at a safe hot temperature. However, steam tables are plagued by many challenges including: High operating costs driven by the need for water to be heated continuously. They pose a safety hazard for employees who risk being injured by […]

Read More

Improving Performance with Thick Film Heaters

Feb 27, 2020 | Varun Kalra

Thick film technology has a track record of meeting the rigorous needs of micro-electric circuits for decades. The technology has been used worldwide for fabricating printed circuit boards, sensors, heaters, and in photonics. Over the past several years, the science of thick film and its manufacturing systems have co-evolved to consistently produce robust electronic devices. […]

Read More

Collaborative Engineering, Shorter Cycle Times and New Technology Drive Datec’s Growth Story in 2019

Jan 27, 2020 | Dominic Talalla, P.Eng, MBA

2019 was a watershed year for Datec Coating Corporation in terms of its commercial and engineering achievements as the company solidified its credentials as a North American leader for patented thick film heating technology.

Read More

Thick Film Heaters Can Power Your Industrial Design

Jan 09, 2020 | Dominic Talalla, P.Eng, MBA

About the Author Latest PostsAbout Dominic Talalla, P.Eng, MBADominic Talalla is CEO of Datec Coating CorporationProviding Essential Products - June 4, 2020Collaborative Engineering, Shorter Cycle Times and New Technology Drive Datec’s Growth Story in 2019 - January 27, 2020Thick Film Heaters Can Power Your Industrial Design - January 9, 2020Season’s Greetings from Datec Coating - […]

Read More

Season’s Greetings from Datec Coating

Dec 17, 2019 | Dominic Talalla, P.Eng, MBA

The holiday season is a wonderful time to reflect on the past year and those who have helped us make it a success. Thank you for your continuing support and may your holiday season be filled with joy! Our Holiday Hours December 25th to January 1st: Closed From all of us here at Datec, we […]

Read More

Modernizing the Food Industry with Thick Film and Glass Heating

Sep 25, 2019 | Dominic Talalla, P.Eng, MBA

The foodservice industry has been evolving for many years, but only in the past 70 years have speed, convenience, and consistency been so necessary to restaurant and food preparation operations, arguably propelled by the ‘McDonaldization’ of the industry. Not only are foodservice retailers needing to “keep up” in these categories, but they need to do […]

Read More

Highlights from the 2019 NAFEM Show

Feb 26, 2019 | Dominic Talalla, P.Eng, MBA

Datec recently attended the NAFEM Food Service and Equipment Supply Show in Orlando, where we had the opportunity to discuss our latest heating innovations for food equipment. NAFEM is North America’s largest food equipment manufacturer event, and an industry leader in providing comprehensive coverage of the trends, technologies, and issues facing the global foodservice experience. […]

Read More

Featured Solution: Portable Cancer Treatment Device for Underdeveloped Countries

Jan 17, 2019 | Dominic Talalla, P.Eng, MBA

At Datec, we design, test, and manufacture application-specific, high-performance heating solutions for our clients. Recently, we developed an aluminum-based heater for a lightweight, battery-powered device used to treat cancer in underdeveloped parts of the world. The client required a medical device that could be used to thermally destroy cancerous cells. Traditionally, such lesions have been […]

Read More

Season’s Greetings from Datec Coating

Dec 17, 2018 | Dominic Talalla, P.Eng, MBA

We would like to wish you a very Happy Holiday and all the best for 2019! We hope you are able to spend the season in the company of your closest family and friends, making wonderful memories, and enjoying everything that this time of year has to offer. Our Holiday Hours • December 24th – […]

Read More

Will Parts Manufacturing and Research into New Technology Save the Canadian Automotive Industry?

Dec 06, 2018 | Dominic Talalla, P.Eng, MBA

General Motors (GM) announced last week that the company will stop making cars in Oshawa, ON after next year and will cease production on many of their gas-powered sedans. Although the latter announcement received less media attention in Canada due largely to the closure of the Oshawa plant, this news reinforces GM’s shift from gas-powered […]

Read More

Global Heating and Controls Manufacturer, E.G.O.- Group Makes Strategic Investment in Datec Coating Corporation

Oct 30, 2018 | Dominic Talalla, P.Eng, MBA

Datec Coating Corporation, a leading thick film heating element manufacturer and materials technology company has received a significant investment by E.G.O.- Group, based in Oberderdingen, Germany. This investment will provide Datec with the capital necessary to continue to expand its operations, invest in its proprietary manufacturing capability, and broaden its sales and marketing reach. “EGO’s expertise, global […]

Read More

Welcome to Our New Website!

Oct 01, 2018 | Dominic Talalla, P.Eng, MBA

Hello and welcome! If you’ve visited our website before, you’ll notice that we’ve made a few changes – we hope you like our new look! As you move through the site, you should get a good idea of what Datec is all about and how our patented pastes enable our engineers to create high-performance, cost-effective […]

Read More

Datec Heats Up Thick Film in Green Cars

Jul 20, 2017 | Dominic Talalla, P.Eng, MBA

Thick Film Heating for Hybrid and Electric Cars With the recent ASIP funding news, Datec is preparing to scale up our production process as we enter into the hybrid and electric vehicle component market and expect to ramp up to producing hundreds of thousands of parts per year for various markets by 2021. What makes our thick film heating […]

Read More

Datec Coating Awarded ASIP Funding

Jul 19, 2017 | Dominic Talalla, P.Eng, MBA

Datec Coating Corporation receives funding of up to $1.3 million dollars from the Automotive Supplier Innovation Program (ASIP). Thick-film heater manufacturer Datec Coating Corporation is awarded up to $1.3 million from Innovation, Science and Economic Development Canada. Minister Navdeep Bains made the announcement during a site visit of the Canadian based Datec Coating manufacturing plant […]

Read More