Datec Technologies –

Developing a Cancer Treatment Device for Underdeveloped Countries

Developing a Cancer Treatment Device for Underdeveloped Countries Datec developed an aluminum-based heater (IntegrAL®-LV) for a low-voltage medical application that is extremely energy efficient, produces even heat, and takes only seconds to reach 120°C. Project Overview The client required a medical device that could be used to thermally destroy cancerous cells. Traditionally, such lesions have […]

Developing a Cancer Treatment Device for Underdeveloped Countries Read More »

Desk-Top PCB Manufacturing

Case Studies / advait

Desk-Top PCB Manufacturing Datec is thrilled to provide Voltera, a fast-growing technology company, with a fast and even heating solution. The Project This manufacturer needed a fast acting, compact heating plate with an even thermal profile to enable its circuit board printer to cure and reflow custom printed circuit boards right from an engineer’s desk.

Desk-Top PCB Manufacturing Read More »

Automotive Heat Exchanger

Case Studies / advait

Automotive Heat Exchanger Datec is providing this world leader in the supply of automotive equipment (including thermal management products), with leading-edge technology. The Project To stay one step ahead of the rapid changes in the automotive design industry, the manufacturer needed to make their cooling devices dual purpose by integrating heat. The Solution Using our

Automotive Heat Exchanger Read More »

Improving Performance and Reliability for a Hot Food Display Case

Case Studies / advait

Improving Performance and Reliability for a Hot Food Display Case Datec applied their mica-TF® heater to a leading OEM’s hot food display case to improve reliability and overall heat consistency. The thick film heating solution that Datec recommended resulted in a more uniform heated surface with improved heat transfer and reliability. Project OverviewThe client required

Improving Performance and Reliability for a Hot Food Display Case Read More »

Datec and University of Manitoba Collaborate on Space Innovation with IntegrAL® Heater

Blog, General, News and Releases / Dana

We are thrilled to announce our partnership with the Price Faculty of Engineering at the University of Manitoba, a collaboration that is set to revolutionize microsatellite development. This exciting venture leverages the cutting-edge IntegrAL® Thick Film Aluminum-Based Heater and opens up new possibilities in space technology. The recently launched Iris satellite, developed by the University

Datec and University of Manitoba Collaborate on Space Innovation with IntegrAL® Heater Read More »

Datec Estimates Thick Film Heater Life of Over 100,000 Hours at 662°F (350°C)

Blog / Dana

At Datec, we pride ourselves on delivering reliable and long-lasting heating solutions to our customers. Recently, we conducted an in-depth analysis of our test data after 30,000 cycles (40 minutes is 1 cycle, 30 seconds on, 10 minutes off) to ensure the stability and performance of our thick film heaters. Here are the key findings

Datec Estimates Thick Film Heater Life of Over 100,000 Hours at 662°F (350°C) Read More »

Reduce Costs and Downtime: Upgrade to Mica TF Heaters for Food Equipment

Blog, Food Handling Equipment / Dana

Upgrade to Datec Thick Film Heaters: Efficiency, Savings, and Improved Uptime Are you still specifying silicone rubber heaters in your food equipment designs? It might be time to rethink that choice. Datec Thick Film Heaters not only offer significant savings on replacement costs but also reduce downtime, providing a solution that’s both efficient and cost-effective.

Reduce Costs and Downtime: Upgrade to Mica TF Heaters for Food Equipment Read More »

Datec’s Reliable Thick Film Heaters for Optimizing Food Quality and Freshness

Blog, Food Handling Equipment, General, Thick Film Heaters / Dana

At Datec, we engineer solutions that elevate food safety and quality standards. Our advanced heating elements are integral to maintaining the optimal conditions necessary for various food products, ensuring freshness and safety. Engineering the Freshness Solution The challenge with many food products lies in keeping them at the ideal temperature to ensure safety and freshness.

Datec’s Reliable Thick Film Heaters for Optimizing Food Quality and Freshness Read More »

Custom Heater for Hot Food Holding

Blog, General / Dana

The restaurant industry relies heavily on well-designed cooking and holding equipment, particularly hot food holding. Temperature control is critical for maintaining food quality and safety, and while off-the-shelf heating solutions are available, they may not always meet the unique needs of your equipment. Customized heating solutions can offer significant benefits for your products, including improved

Custom Heater for Hot Food Holding Read More »

Tips for Choosing a Heating Element

Blog, General / Dana

As technology continues to advance, the need for efficient and effective heating solutions has become increasingly important in many industries. There is now a vast array of heating elements available on the market, each with unique features and benefits. However, choosing the right heating element for a specific application can be overwhelming, and selecting the

Tips for Choosing a Heating Element Read More »

Global Innovation Leader

North American

Call us Today

Developing a Cancer Treatment Device for Underdeveloped Countries

Desk-Top PCB Manufacturing

Automotive Heat Exchanger

Improving Performance and Reliability for a Hot Food Display Case

Datec and University of Manitoba Collaborate on Space Innovation with IntegrAL® Heater

Datec Estimates Thick Film Heater Life of Over 100,000 Hours at 662°F (350°C)

Reduce Costs and Downtime: Upgrade to Mica TF Heaters for Food Equipment

Datec’s Reliable Thick Film Heaters for Optimizing Food Quality and Freshness

Custom Heater for Hot Food Holding

Tips for Choosing a Heating Element

Quick Links

Industries We Serve

Contact us

Email

Phone

WhatsApp

LinkedIn

Address